|
PROTON is a full spectrum intensive care ventilator for Paediatric and Adult patients and provides complete ventilation solutions. PROTON is pneumatically powered-micro Processor Controlled ventilator. It has all advance invasive and non invasive (Bi-level) modes with facility of showing Pressure, Volume and Flow graphs. O2 blending and built in nebulizer are another distinct advantages of PROTON. It comes with colour TFT display.
|
| |
| Operartional Parameters |
| Modes |
CMV - Volume Controlled |
| |
SIMV - Volume Controlled |
| |
ASSIST - Apnea Back-Up |
| |
PSV-SIMV |
| |
PSV - Apnea Back-Up
|
| |
CMV - PCV / ASSIST - PCV / SIMV - PCV |
| |
Bi - NIV / CPAP |
|
| |
| Displayed Parameters |
|
Breaths per Minute (BPM)
|
0 to 120
|
| Tidal Volume (VT) |
30 to 300 cc in Pediatric Mode
|
|
300 to 3000 cc in Adult Mode
|
|
Inspiratory (VT)
|
0.16 to 4 seconds or 20 to 80% of Breath cycle
|
| Peak Flow Rate |
Pediatric: |
| Adult: |
|
| 6 to 50 lit./min maximum |
| 6 to 150 lit./min maximum |
|
| Inspiratory Pressure |
0 to 80 cm of H20 |
| PEEP |
0 to 35 cm of H20 |
| Inspiratory Pause |
15 to 50% of Ti |
| O2 Blending |
21 to 100% |
| Pressure Trigger |
.5 to 15 cm of H20 below PEEP |
| Flow Trigger |
0.3 to 30 Ipm |
| Apnea Back-Up Time |
5 to 60 sees |
|
| |
| Alarms : Preset and Settable |
| Airway Pressure |
High, Low |
| Inspired VT |
High, Low |
| Expired Volume |
Low |
| FiO2 |
High, Low |
| PEEP |
High, Low |
| Breaths |
High |
| Apnea Alarm Time |
5 to 60 seconds |
| Mechanical Pressure Release Valve |
90 cm of H2O |
|
| |
| Measured Parameters |
| No of Breaths |
Spontaneous, Total Breaths
per minute |
| Airway Pressure |
Peak, Plateau, Mean, PEEP |
| Patient Trigger Effort |
Trigger Pressure, Trigger Flow |
| Tidal Volume |
Inspired, Expired |
| O2 Concentration |
Inspired O2 |
| Graphics on 57" LCD |
Pressure-Time / Volume-Time / Flow-Time |
|
| |
| Electrical and Gas Supply |
| Input Supply |
175 to 260 Volts OR 90 to 132 Volts AC, 50/60 Hz |
| Internal Battery Back-Up |
60 Minutes |
| External Battery |
Optional : 10 to 15 Volts DC |
| Power Consumption |
70 Watts (Approx.) for basic ventilator |
| VA Requirement |
I I5 VA (Approx.) for basic ventilator |
| Gas Input |
Medical Grade Air & O2 at 2.7 to 6 bar (39 to 87 psi) |
|
| |
| Physical Specifications |
| Dimensions |
480 (W) x 290 (D) x 285 (H) mm without trolley |
| Weight |
15 Kg for basic ventilator unit |
| Display |
5.7" Colour TFT LCD (Internal) |
| Communication Output |
RS-485 connectivity for monitoring multiple units |
|
| |
| Accessories |
|
| Breathing Circuit (Single Use) |
External TFT Monitor |
| Nebuliser Unit |
Tube Support Arm |
| Fluid Collection Bottl |
Compressor (Optional) |
| HME, Bacteria Filter |
Humidifier (Optional) |
| Trolley (Cart) |
NIV-Mask (Optional) |
|
| |
| External TFT LCD for Enhanced Monitoring |
| Parameters |
Dynamic Airway Pressure Indication |
| Mode, BPM, Spont. BPM,Vti ,Vte, PEEP, Ppeak, FiO2 |
| Graphical Display of Lung Mechanics |
Airway Pressure v/s Time |
| Tidal Volume v/s Time |
| Flow Rate v/s Time |
| Airway Pressure v/s Flow Rate |
| Tidal Volume v/s Airway Pressure |
| Flow Rate v/s Tidal Volume |
| Display Size |
47 cm Wide Screen TFT LCD Monitor |
| Resolution |
1024 x 768 Pixels |
| Power Consumption |
30 Watts approximately |
| Supply Voltage |
230 Volts A.C., 50 Hz |
|